SDR-Control for Icom Downloads & RevenueSDR-Control for Icom · App Store
Not in any tracked top chart right now.
Updated 9 Nov 2026 · rankings refresh through the day
DeveloperMarcus Roskosch
CategoryUtilities
Price8,000 JPY
Released
Rating★ 4.0 (7)
Version27.0.16
Age rating4+
First seen by us
25 Sep 2026
25 Sep 2026📈Entered the top 10 on iPad · Top Paid All Apps📦Updated to version 27.0.10📦Updated to version 27.0.9🆕First spotted by AppInsider🆕Its developer released another app: OSINT Toolbox
Full timeline · 8 events
- 📈SDR-Control for Icom entered the top 10 on iPad · Top Paid All AppsBR
- 📦SDR-Control for Icom updated to version 27.0.10This update contains the following changes and improvements:
◉ SSTV: Robot 36 pictures (the mode the ISS sends) came out green and only showed their left half; fixed, together with other modes that were slanted or shifted sideways
◉ SSTV: pictures start in the right place by themselves, and the start of a picture is recognised with weaker signals and when the receiver is tuned up to 100 Hz off
◉ SSTV: every mode can now be sent, including Robot 36, Robot 72, Robot 24 and PD-50 to PD-290
◉ SSTV: the sender's call sign (FSK ID) is shown again
◉ Antenna Genius: the antenna buttons work again with firmware 4.1.9; a tap selects the receive antenna, while transmitting the transmit antenna
◉ Power Genius XL: changing the remote access code works; Rotator Genius: rotator names are saved correctly
◉ PSK Reporter: changing the time, band or mode in the filter now loads the list again
◉ Network Stats: a Saved Radios section shows whether each of your saved radios answers, also while not connected
◉ Radio list: a dot before each radio shows whether it answers, and its address is shown below the name
◉ Waterfall: Center, the level slider and the zoom buttons moved to the left
◉ Implemented several additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE… more - ✏️SDR-Control for Icom: app got bigger49 MB → 57 MB (+16%)
- 📦SDR-Control for Icom updated to version 27.0.9This update contains the following changes and improvements:
◉ A new look: the app now follows Apple's own iOS design, in light and dark mode, on the iPad and the iPhone
◉ New tab bar with Waterfall (iPhone: VFO), Modes, Tools, your radio and Settings
◉ Modes and tools keep running when you leave their screen; a green dot on the tile shows which ones are running
◉ Runs on Apple Vision Pro
◉ New modes: FT8-Improved and JS8 (iOS 26), Speech (iOS 26: incoming voice transcribed and optionally translated, your typed text sent as speech) and CW with decoder and CW keyboard
◉ CW: improved decoder
◉ CW: the new ESM mode (Enter Sends Message)
◉ HF-Fax and SSTV: a frequency list that tunes the radio, and Auto Save into Photos
◉ All tools redesigned: DX Cluster, POTA, PSK Reporter, Band Plan, Call Lookup, Logbook, Network Stats, Memories, Scanning, FS2M Keyer, Command Bar, Ultra Beam and the controllers
◉ New: Genius (4O3A) devices
◉ Voice Macros: the radio's voice memories or your own recordings in the app
◉ Several MIDI controllers can be used at the same time
◉ The radio controls are now compact floating panels (CW, Memories, Tune Stack, Macros, Command Bar, DTMF, RIT / ∆TX, D-Star)
◉ The Tuning panel and the PTT are floating panels too
◉ The band plan is shown on the waterfall as a coloured ribbon
◉ Demo radio: try the app without a radio
◉ The radio keeps playing in the background, for example with the iPad cover closed or the screen locked
◉ Fixed: the audio didn't come back after a phone call or after an interruption by another app
◉ Fixed: a crash when iOS started the app in the background
◉ New controller actions: VFO / Memory Toggle, VFO Mode, Memory Mode, Mode Previous, CW pitch, Clear Log Window, Memory 1-10, Memory Up / Down
◉ Controller knobs on RIT change it in 10 Hz steps from the current offset
◉ IC-7300 / IC-7300MK2 offer Preamp 1 and 2 only; IC-705 Preamp 1 and 2, IC-9700 and IC-905 Preamp 1
◉ IC-7300 / IC-7300 MK2: A / B now exchanges the two VFOs (before, the radio only switched to VFO B)
◉ FT8 and JS8 only widen a filter narrower than 3 kHz and no longer make a wider one narrower
◉ WSPR: received spots reach WSPRnet again; the status line shows the result
◉ Restore default settings keeps your calls, macros, Command Bar, logins and radio list
◉ The Dark Mode setting works again (default: Auto)
◉ Better VoiceOver support
◉ The manual has been updated
◉ Implemented several additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE… more - 🆕SDR-Control for Icom first spotted by AppInsider#189 in Top Paid · All Apps · Japan
- 📦SDR-Control for Icom version 1.9.151This update contains the following changes and improvements:
◉ Added a Terminal mode for APRS. You can now connect to BBSes or start a keyboard-to-keyboard session with another ham radio operator.
◉ APRS can now auto-repeat position and status reports.
◉ The APRS RX button now indicates a transmission, providing clearer feedback.
◉ Additional APRS improvements and refinements.
◉ For the RIT/XIT view there is now a setting for defining minimum and maximum RIT/XIT values, improving support for satellite operation.
◉ Command Bar improvements.
◉ PTT Double-Tap has been removed for a better PTT button experience.
◉ The “Available Radios” screen now remembers the last connection so you can just hit the Connect button in case you like to connect with the same Radio.
◉ Additional changes in preparation for an upcoming iOS release.
◉ Implemented some additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE… more - 🆕SDR-Control for Icom: its developer released another app: OSINT Toolbox
- 🆕SDR-Control for Icom released on the App Store
Collected from the stores by AppInsider since we first spotted the app. Dates are when we saw each change.
Rating
4.0 ★
7 ratings
Measured
SDR-Control for Icom on the App Store
App details
App ID
1614141094
Publisher
Marcus Roskosch
On the store since
Apr 2022
4 years on the store
Minimum OS
iOS 17.6+
Devices
iPad
Content rating
4+
Languages
1
EN
Size
59 MB
Where it ranks now
Every top chart it appears in across 30 countries.
| Country | Charts | Rank |
|---|---|---|
| Not charting right now. | ||
Ratings
App Store, worldwide.
Rating
4.0 ★
7 ratings
Measured
Ratings
7
Measured
About SDR-Control for Icom
Your Icom radio on your iPad: at home over Wi-Fi or from anywhere over the internet. Made by a ham, for hams, with personal support included.
SDR-Control shows the spectrum scope and waterfall of your Icom radio with all its controls on the large iPad screen. No extra hardware or software needed.
WORKS WITH
■ IC-705 (Wi-Fi)
■ IC-7610, IC-7760, IC-9700, IC-7300 MK2 and the IC-R8600 receiver (radio on your network by cable)
The app connects over the network only. The older IC-7300 (without MK2) has no network connection and can't be used.
OPERATE
■ Spectrum scope and waterfall with band plan, DX Cluster and FT8 spots
■ Two VFOs, filters, preamp, attenuator, NB, NR, notch, AGC and more
■ Compact floating panels: tuning, PTT, CW, memories, macros, Command Bar, DTMF, RIT / ∆TX, D-Star
■ Your iPad as microphone and speaker; the radio keeps playing in the background, also with the cover closed
MODES
■ FT8-Improved with AutoAnswer and AutoCQ, plus the classic FT8
■ JS8 keyboard chat
■ CW with decoder, keyer and CW keyboard
■ Speech: incoming voice transcribed and translated, your typed text sent as speech
■ SSTV, HF-Fax, APRS and WSPR
FT8-Improved, JS8, Speech and WSPR need iPadOS 26.
TOOLS
■ Logbook with ADIF import and export, shared via iCloud with SmartSDR, FT-Control, TS-Control and K4-Control, on iPhone, iPad, Mac and Apple Vision Pro
■ DX Cluster, POTA, PSK Reporter, Call Lookup, Band Plan, Network Stats, Memories, Scanning, S.A.T.
■ Controllers: MIDI, CTR2, HaliKey, Pryme, Flic
■ 4O3A Genius devices and Ultra Beam antennas
MADE BY A HAM
Made by Marcus, DL8MRE, who has been developing apps for Apple devices since 2009 and uses this app every day in his own shack, where all supported radios are on the desk. Personal online support and a detailed manual are included. Updates with new modes and features are free: no subscription, no in-app purchases.
WHAT YOU NEED
■ One of the radios above, connected to your network
■ An iPad with iPadOS 18 or later
■ For use over the internet: access to your home network from outside (see the manual)
Manual: https://go-to.me/sdrcontrol-ios-manual
More apps: https://ham-radio-apps.com
SDR-Control is developed independently and is not affiliated with or endorsed by Icom.
SDR-Control shows the spectrum scope and waterfall of your Icom radio with all its controls on the large iPad screen. No extra hardware or software needed.
WORKS WITH
■ IC-705 (Wi-Fi)
■ IC-7610, IC-7760, IC-9700, IC-7300 MK2 and the IC-R8600 receiver (radio on your network by cable)
The app connects over the network only. The older IC-7300 (without MK2) has no network connection and can't be used.
OPERATE
■ Spectrum scope and waterfall with band plan, DX Cluster and FT8 spots
■ Two VFOs, filters, preamp, attenuator, NB, NR, notch, AGC and more
■ Compact floating panels: tuning, PTT, CW, memories, macros, Command Bar, DTMF, RIT / ∆TX, D-Star
■ Your iPad as microphone and speaker; the radio keeps playing in the background, also with the cover closed
MODES
■ FT8-Improved with AutoAnswer and AutoCQ, plus the classic FT8
■ JS8 keyboard chat
■ CW with decoder, keyer and CW keyboard
■ Speech: incoming voice transcribed and translated, your typed text sent as speech
■ SSTV, HF-Fax, APRS and WSPR
FT8-Improved, JS8, Speech and WSPR need iPadOS 26.
TOOLS
■ Logbook with ADIF import and export, shared via iCloud with SmartSDR, FT-Control, TS-Control and K4-Control, on iPhone, iPad, Mac and Apple Vision Pro
■ DX Cluster, POTA, PSK Reporter, Call Lookup, Band Plan, Network Stats, Memories, Scanning, S.A.T.
■ Controllers: MIDI, CTR2, HaliKey, Pryme, Flic
■ 4O3A Genius devices and Ultra Beam antennas
MADE BY A HAM
Made by Marcus, DL8MRE, who has been developing apps for Apple devices since 2009 and uses this app every day in his own shack, where all supported radios are on the desk. Personal online support and a detailed manual are included. Updates with new modes and features are free: no subscription, no in-app purchases.
WHAT YOU NEED
■ One of the radios above, connected to your network
■ An iPad with iPadOS 18 or later
■ For use over the internet: access to your home network from outside (see the manual)
Manual: https://go-to.me/sdrcontrol-ios-manual
More apps: https://ham-radio-apps.com
SDR-Control is developed independently and is not affiliated with or endorsed by Icom.
Latest updates
27.0.16
This update contains the following changes and improvements:
◉ New RTTY mode: receive and send RTTY, with a tuning display (crossed ellipse) and a tuning wheel; RTTY Macros in Tools, Macros
◉ New PSK mode: PSK31, PSK63 and PSK125, with a list of all stations in the passband; PSK Macros in Tools, Macros
◉ New tool: Frequency List (with On Air, Near and the EiBi download)
◉ IC-9700: the external preamp (EXT-P.AMP) can be chosen again
◉ Memories: recalling a memory without split switches split off in the radio
◉ Network Stats: a radio reached over the internet is no longer treated as local
◉ Dark mode: buttons, links and switches are readable again; the D-Star bars use the darker colours too
◉ Tuning panel: the frequency field follows the radio unless you are typing a new value
◉ On iOS 26 the app now uses Apple's current design, as on iOS 27
◉ iOS 18: the tab bar has a background again, so the tabs are easy to read on the radio screen and in the modes
◉ Logbook: Share ADIF File sends the log as a file again (Mail attaches it, Gmail no longer refuses it); all QSOs are written in the order of the list
◉ Logbook: before Fix Problems, Merge Duplicates, Mass Change or an import that replaces the log, the app saves a copy of the whole log, so nothing is lost
◉ FT8-Improved: Auto Answer sends the 73 after RR73 (no more "Auto Answer stopped. No success"); more room for the frequency fields and the UTC column on the iPad
◉ JS8: the SNR command sends the measured report; APRS: your own path (Custom), for example for ARISS
◉ S.A.T.: choosing a transponder in the app changes it on the S.A.T. again
◉ Dark mode: the blue and red bars of the old FT8 mode and FT8 Options use darker colours
◉ Fixed: your call, grid and other settings were lost when iCloud is off for the app
◉ VoiceOver: no spoken "Transmitting" / "Receiving" in CW, where break-in switches with every character; better VoiceOver labels in the tools
◉ Implemented several additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
27.0.10
This update contains the following changes and improvements:
◉ SSTV: Robot 36 pictures (the mode the ISS sends) came out green and only showed their left half; fixed, together with other modes that were slanted or shifted sideways
◉ SSTV: pictures start in the right place by themselves, and the start of a picture is recognised with weaker signals and when the receiver is tuned up to 100 Hz off
◉ SSTV: every mode can now be sent, including Robot 36, Robot 72, Robot 24 and PD-50 to PD-290
◉ SSTV: the sender's call sign (FSK ID) is shown again
◉ Antenna Genius: the antenna buttons work again with firmware 4.1.9; a tap selects the receive antenna, while transmitting the transmit antenna
◉ Power Genius XL: changing the remote access code works; Rotator Genius: rotator names are saved correctly
◉ PSK Reporter: changing the time, band or mode in the filter now loads the list again
◉ Network Stats: a Saved Radios section shows whether each of your saved radios answers, also while not connected
◉ Radio list: a dot before each radio shows whether it answers, and its address is shown below the name
◉ Waterfall: Center, the level slider and the zoom buttons moved to the left
◉ Implemented several additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
27.0.9
This update contains the following changes and improvements:
◉ A new look: the app now follows Apple's own iOS design, in light and dark mode, on the iPad and the iPhone
◉ New tab bar with Waterfall (iPhone: VFO), Modes, Tools, your radio and Settings
◉ Modes and tools keep running when you leave their screen; a green dot on the tile shows which ones are running
◉ Runs on Apple Vision Pro
◉ New modes: FT8-Improved and JS8 (iOS 26), Speech (iOS 26: incoming voice transcribed and optionally translated, your typed text sent as speech) and CW with decoder and CW keyboard
◉ CW: improved decoder
◉ CW: the new ESM mode (Enter Sends Message)
◉ HF-Fax and SSTV: a frequency list that tunes the radio, and Auto Save into Photos
◉ All tools redesigned: DX Cluster, POTA, PSK Reporter, Band Plan, Call Lookup, Logbook, Network Stats, Memories, Scanning, FS2M Keyer, Command Bar, Ultra Beam and the controllers
◉ New: Genius (4O3A) devices
◉ Voice Macros: the radio's voice memories or your own recordings in the app
◉ Several MIDI controllers can be used at the same time
◉ The radio controls are now compact floating panels (CW, Memories, Tune Stack, Macros, Command Bar, DTMF, RIT / ∆TX, D-Star)
◉ The Tuning panel and the PTT are floating panels too
◉ The band plan is shown on the waterfall as a coloured ribbon
◉ Demo radio: try the app without a radio
◉ The radio keeps playing in the background, for example with the iPad cover closed or the screen locked
◉ Fixed: the audio didn't come back after a phone call or after an interruption by another app
◉ Fixed: a crash when iOS started the app in the background
◉ New controller actions: VFO / Memory Toggle, VFO Mode, Memory Mode, Mode Previous, CW pitch, Clear Log Window, Memory 1-10, Memory Up / Down
◉ Controller knobs on RIT change it in 10 Hz steps from the current offset
◉ IC-7300 / IC-7300MK2 offer Preamp 1 and 2 only; IC-705 Preamp 1 and 2, IC-9700 and IC-905 Preamp 1
◉ IC-7300 / IC-7300 MK2: A / B now exchanges the two VFOs (before, the radio only switched to VFO B)
◉ FT8 and JS8 only widen a filter narrower than 3 kHz and no longer make a wider one narrower
◉ WSPR: received spots reach WSPRnet again; the status line shows the result
◉ Restore default settings keeps your calls, macros, Command Bar, logins and radio list
◉ The Dark Mode setting works again (default: Auto)
◉ Better VoiceOver support
◉ The manual has been updated
◉ Implemented several additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
Store changes
What SDR-Control for Icom changed on its store page: name, icon, screenshots, price, size, languages, requirements.
App got bigger
49 MB → 57 MB (+16%)
