Shutter-Speed Downloads & RevenueShutter-Speed · App Store
Not in any tracked top chart right now.
Updated 8 Nov 2026 · rankings refresh through the day
DeveloperFilmomat GmbH
CategoryUtilities
PriceFree
Released
Rating★ 3.6 (23)
Version2.1
Age rating4+
First seen by us
23 Oct 2026
23 Oct 2026Full timeline · 2 events in the last 12 months
- 🆕Shutter-Speed first spotted by AppInsiderUnited States (found via developer)
- 🆕Shutter-Speed released on the App Store
Collected from the stores by AppInsider since we first spotted the app. Dates are when we saw each change.
Rating
3.6 ★
23 ratings
Measured
Shutter-Speed on the App Store
App details
App ID
560154244
Publisher
Filmomat GmbH
On the store since
Sep 2012
14 years on the store
Minimum OS
iOS 13.0+
iPhone 6s and later
Devices
iPhone · iPad
Universal purchase
Content rating
4+
Languages
1
EN
Size
6 MB
Also listed in
Photo & Video
Where it ranks now
Every top chart it appears in across 30 countries.
| Country | Charts | Rank |
|---|---|---|
| Not charting right now. | ||
Ratings
App Store, worldwide.
Rating
3.6 ★
23 ratings
Measured
Ratings
23
Measured
About Shutter-Speed
With Shutter-Speed you can test the shutter speeds of your analog cameras just with your iPhone. Please note that the full potential of this App is only reached if you use it in combination with the PhotoPlug. The PhotoPlug is an optical sensor which connects to the headphone-jack of your iPhone and enables you to measure the actual amount of light passing through the camera shutter. Please visit www.filmomat.eu for detailed information and for ordering the PhotoPlug.
How-To:
Point the camera towards a bright light source. Place the PhotoPlug closely behind the camera shutter. Start the measurement and release the shutter. The App automatically analyzes the signal and calculates the shutter speed. All measurement values can be stored into a handy table. Multiple different cameras/lenses can be stored. A correction factor is calculated, which you can use to compensate a faulty shutter speed. For example, if you measure the 1/60s and it turns out to be 1/50s, the App will tell you that the shutter-speed is 1/3 stops too long. This gives rise to a correction factor of -1, indicating that you have to close your aperture by 1/3 f-stop to get a correct exposure.
Without PhotoPlug, the App will record the sound of the camera shutter and calculate the shutter speed from that. Please note that this procedure will only give useable results for speeds below 1/30sec. With the PhotoPlug, shutter speeds up to 1/500sec can be measured.
How-To:
Point the camera towards a bright light source. Place the PhotoPlug closely behind the camera shutter. Start the measurement and release the shutter. The App automatically analyzes the signal and calculates the shutter speed. All measurement values can be stored into a handy table. Multiple different cameras/lenses can be stored. A correction factor is calculated, which you can use to compensate a faulty shutter speed. For example, if you measure the 1/60s and it turns out to be 1/50s, the App will tell you that the shutter-speed is 1/3 stops too long. This gives rise to a correction factor of -1, indicating that you have to close your aperture by 1/3 f-stop to get a correct exposure.
Without PhotoPlug, the App will record the sound of the camera shutter and calculate the shutter speed from that. Please note that this procedure will only give useable results for speeds below 1/30sec. With the PhotoPlug, shutter speeds up to 1/500sec can be measured.
Latest updates
2.1
- Fixed overlapping layout with Old/New Shutterspeed-Button.
- Added additional decimal digit to measured time (e.g. 1/8.2 instead of 1/8) for more accuracy.
