Tina2sWIFI
Not in any tracked top chart right now.
Updated 25 Oct 2026 · rankings refresh through the day
Developer杰 曹
CategoryUtilities
PriceFree
Released
Rating★ 5.0 (2)
Version1.2.1
Age rating4+
First seen by us
24 Oct 2026
24 Oct 2026Rating
5.0 ★
2 ratings
Measured
Tina2sWIFI on the App Store
App details
App ID
6443675823
Publisher
杰 曹
On the store since
Oct 2022
4 years on the store
Minimum OS
iOS 14.2+
iPhone 6s and later
Devices
iPhone · iPad
Universal purchase
Content rating
4+
Size
66 MB
Where it ranks now
Every top chart it appears in across 30 countries.
| Country | Charts | Rank |
|---|---|---|
| Not charting right now. | ||
Ratings
App Store, worldwide.
Rating
5.0 ★
2 ratings
Measured
Ratings
2
Measured
About Tina2sWIFI
Tina2s Wifi is a special WIFI network configuration APP for 3D printer Tina2s.
Tina2S Wifi connects the 3D printer through Bluetooth and sends the distribution command to the 3D printer. Therefore, please turn on the Bluetooth switch in your phone before using this APP.
Tina2s Wifi provides two ways to find the 3D printer. First, scan the QR code in the network menu of the 3D printer, identify the serial number of the device, and then search the Bluetooth device corresponding to the serial number. Second, scan and display all names in BLUFI_ First, and then manually select the device you want to connect to.
After Tina2S Wifi is connected to the 3D printer through Bluetooth, it will automatically search and display the WIFI hotspots near the 3D printer. After selecting the WIFI hotspot and entering the password, the APP will notify the 3D printer to try to access the WIFI hotspot. After the connection is successful, the APP will prompt, and the 3D printer main screen will also display the IP address immediately.
If the APP prompts that the AP cannot be connected or the connection times out, please restart the 3D printing and WIFI router and try again.
Tina2S Wifi connects the 3D printer through Bluetooth and sends the distribution command to the 3D printer. Therefore, please turn on the Bluetooth switch in your phone before using this APP.
Tina2s Wifi provides two ways to find the 3D printer. First, scan the QR code in the network menu of the 3D printer, identify the serial number of the device, and then search the Bluetooth device corresponding to the serial number. Second, scan and display all names in BLUFI_ First, and then manually select the device you want to connect to.
After Tina2S Wifi is connected to the 3D printer through Bluetooth, it will automatically search and display the WIFI hotspots near the 3D printer. After selecting the WIFI hotspot and entering the password, the APP will notify the 3D printer to try to access the WIFI hotspot. After the connection is successful, the APP will prompt, and the 3D printer main screen will also display the IP address immediately.
If the APP prompts that the AP cannot be connected or the connection times out, please restart the 3D printing and WIFI router and try again.
Latest updates
1.2.1
Add support for 18-digit serial number in the QR code scanning page.
