XTray Pro Downloads & RevenueXTray Pro · App Store
21 days old
XTray Pro is #106 in Productivity Paid in United States and charting in 1 of 30 countries we track.
Updated 11 Nov 2026 · rankings refresh through the day
DeveloperJakub Trytek
CategoryProductivity
Price14.99 USD
Released
Rating★ 0.0 (0)
Version1.0.1
Age rating4+
First seen by us
1 Nov 2026
1 Nov 2026Full timeline · 3 events
- 🆕XTray Pro first spotted by AppInsider#59 in Top Paid · Productivity · United States
- 📦XTray Pro version 1.0.1Wire mesh trays: the preview now cuts wire by wire, in the order you would on site.
Zoomed in, it shows the exact cut lines: every wire to cut, the cross wire you cut against, and the cell number with its distance from the start of the stock.
A new "Next cut" button zooms straight to the next row to cut.… more - 🆕XTray Pro released on the App Store
Collected from the stores by AppInsider since we first spotted the app. Dates are when we saw each change.
Rating
0.0 ★
0 ratings
Measured
Best rank now
#106
Productivity PaidMeasured
XTray Pro on the App Store
App details
App ID
6824247766
Publisher
Jakub Trytek
On the store since
Oct 2026
Under a year
Minimum OS
iOS 17.0+
iPhone XS and later
Devices
iPhone · iPad
Universal purchase
Content rating
4+
Languages
1
EN
Size
1 MB
Also listed in
Utilities
Where XTray Pro's downloads come from Modelled
Last 30 days: organic search, browsing the store, features and paid ads.
Where it ranks now
Every top chart it appears in across 30 countries.
| Country | Charts | Rank |
|---|---|---|
| United States | ProductivityPaid | #106 |
Apps near XTray Pro on the chart
Productivity Paid, around #106.
Ratings
App Store, worldwide.
Rating
0.0 ★
0 ratings
Measured
Ratings
0
Measured
About XTray Pro
XTray Pro is a field tool for cable tray fitters, from the makers of XPipe Pro. Bends, offsets, crossings over obstacles, reducers and tees cut from a straight length of tray — with the marks to scribe before the grinder comes out.
SHEET AND WIRE MESH TRAYS
For sheet trays: a cutting template of the opened-out tray and a table of where to cut from the start of the stock, how wide a wedge to take out and on which side. For wire mesh trays: which cells to cut and how many wires in the bottom and the sides. You enter the mesh cell as your maker builds it — the app does not assume one system.
SEE THE RESULT
The finished-shape preview plays the job through: the wires are cut, then the tray folds to its final shape. Turn it in 3D with a finger, or look at it flat from above or the side. Pinch or tap to zoom.
TOOLS
• Flat bend — a corner on one level, any angle and radius
• Vertical bend — up or down a wall, wedges or saw cuts
• Offset and change of level — two bends, travel and advance
• Crossing an obstacle — over a beam, pipe or another tray, three or four bends
• Width reducer — one side or both
• Tee and cross — the opening in the side, the bottom lap, laterals
• Bill of materials — lengths with waste, splices, bolts, supports, rods, anchors
• Fill and load — percentage fill, kg/m, the smallest standard tray
MEASURE THE WAY YOU DO ON SITE
You enter the route from the points where the centre lines meet, the way it is measured on the job. The app works out how much stock each bend takes and exactly where the cuts fall. It warns when bends run into each other, wedges overlap, or cuts land in the same mesh cell.
NO ADS, NO ACCOUNT
Works offline and collects no data. Polish and English, millimetres or inches, dark and light.
The results are cutting geometry. Check safe loads, support spacing and the design's requirements against the maker's data and the drawings.
SHEET AND WIRE MESH TRAYS
For sheet trays: a cutting template of the opened-out tray and a table of where to cut from the start of the stock, how wide a wedge to take out and on which side. For wire mesh trays: which cells to cut and how many wires in the bottom and the sides. You enter the mesh cell as your maker builds it — the app does not assume one system.
SEE THE RESULT
The finished-shape preview plays the job through: the wires are cut, then the tray folds to its final shape. Turn it in 3D with a finger, or look at it flat from above or the side. Pinch or tap to zoom.
TOOLS
• Flat bend — a corner on one level, any angle and radius
• Vertical bend — up or down a wall, wedges or saw cuts
• Offset and change of level — two bends, travel and advance
• Crossing an obstacle — over a beam, pipe or another tray, three or four bends
• Width reducer — one side or both
• Tee and cross — the opening in the side, the bottom lap, laterals
• Bill of materials — lengths with waste, splices, bolts, supports, rods, anchors
• Fill and load — percentage fill, kg/m, the smallest standard tray
MEASURE THE WAY YOU DO ON SITE
You enter the route from the points where the centre lines meet, the way it is measured on the job. The app works out how much stock each bend takes and exactly where the cuts fall. It warns when bends run into each other, wedges overlap, or cuts land in the same mesh cell.
NO ADS, NO ACCOUNT
Works offline and collects no data. Polish and English, millimetres or inches, dark and light.
The results are cutting geometry. Check safe loads, support spacing and the design's requirements against the maker's data and the drawings.
Latest updates
1.0.1
Wire mesh trays: the preview now cuts wire by wire, in the order you would on site.
Zoomed in, it shows the exact cut lines: every wire to cut, the cross wire you cut against, and the cell number with its distance from the start of the stock.
A new "Next cut" button zooms straight to the next row to cut.
